Graphite Ultrafine Vertical Mill

Under the double influence of policy support and technological progress, the new energy vehicle market and energy storage battery market will maintain a rapid growth trend. Driven by the demand for corresponding lithium batteries, artificial graphite anode materials will still maintain a relatively high growth rate, the market scale of artificial graphite anode materials will further expand, and its mainstream position in anode materials will continue. Based on the comprehensive consideration of cost and performance, artificial graphite is widely used in the power battery market due to its good cycle performance and relatively superior safety performance. Artificial graphite anode materials meet the requirements of power batteries and energy storage batteries for cycle life and safety.

Graphite ultrafine vertical mill is based on the vertical mill and introduces modern ultrafine vertical mill grinding roller technology to design and develop a new type of ultrafine grinding equipment—ultrafine vertical mill, which is a large-scale non-metallic mineral It is an ideal equipment for large-scale powder plant construction. The single machine of this equipment can produce 5-18 tons per hour, and the discharge can produce 0.038mm-0.02mm at one time, and the smallest can reach 0.005mm.

Performance advantages of graphite ultra-fine vertical mill:

1. Intelligent grinding roller pressurization control: The grinding roller pressurization control mode automatically controlled by PLC/DCS is adopted, and the grinding pressure is accurately controlled without manual operation. At the same time, it is equipped with a mechanical limit device and an electronic limit to prevent the direct contact between the roller sleeve and the disc liner, avoiding destructive impact and severe vibration.

2. Multi-head powder separator: the principle of multi-head powder separator is adopted, and each rotor can be adjusted by frequency conversion, and the fineness of the finished product can be realized within the selected range, without the need for secondary wind selection and classification, and there is no inferior product the existence of materials.

3. Material layer pre-compacting device: The pre-compacting device can ensure more effective "feeding" of the grinding part, so as to achieve very fine grinding; the vibration of the ultra-fine vertical mill is small, and the power can be effectively exerted.