What should be paid attention to when the mill is shut down and stored for a long time in the mill production line?

1. Before the mill stops, it is necessary to stop the feeding operation first. After the material in the grinding chamber is produced and discharged, stop the mill. For the sequence of stopping the mill, it is exactly opposite to the sequence of starting it. For the mill, after stopping, the oil supply system and cooling system must be stopped first. If it is in winter, it needs to be released first. The remaining part of the bearing circulates the water.

2. If the mill is not used for a long time, the first thing to pay attention to is the storage of the equipment. This can be stored according to the weather. For example, it needs to be protected from moisture in rainy days, and it needs to be ventilated in high temperature weather. If these details are not done well If it is not, it is easy to cause adverse effects on the performance of the mill. In addition, when the mill is in storage, the operator must carefully check whether each part is in good condition, and it needs to be turned on and run every once in a while, so as to maintain the flexibility of the parts. Before starting the machine next time, be sure to check every part of the equipment, and only when everything is normal can the normal production work be carried out.