Introduction

Twin Shaft Mineral sizer provide primary, secondary and tertiary reduction of friable, low silica materials such as coal, salt, gypsum, phosphate, limestone, bauxite, petroleum coke, lignite, trona, carbon anodes, oil sands, clay, shale and more.In put size :1200mm to 1500 mm Out put size: 300 mm to 500 mm;Large capacity,Max capacity with 5000 t/h,with high efficiency, reliable running;Crushing tooth with spiral arrangement,block rate  more than 95%; FP series mineral sizer is a new conception crusher, which is completely different from the traditional toothed roll crusher of which crushed material and ores by impact and squeezing force.More tooth pattern choice for more efficiency crushing and low energy consumption. When crushing the medium hard materials, like coal, coke and limestone, etc, the energy consumption of  FP mineral sizer is 0.21—0.45kw.h/t, while jaw crusher 0.46—1.5 kw.h/t, impact crusher 0.94—1.27 kw.h/t，ring hammer crusher 0.86—1.24 kw.h/t. This is why our customers choose us.

 

Mineral Sizer for most materials

coal (open pit coal mine, coal mine in pit, coal washery, coal chemical engineering factory, power plant, frozen coal block ), limestone ( cement industry, aggregate, lime industry); Cooper ores, gold ores, Nickel Ores, iron ores, bauxite, Gypsum, talc ores, wollastonite ores, kaolin, granite and more other materials.

High Capacity and Compact

The unique breaking action processes material quickly and efficiently, resulting in high production capacities and compact machines.

Mineral sizers are capable of capacities in excess of 10,000 tonnes per hour.

Wet & Sticky Sizing

The Twin Shaft Mineral Sizer, has the ability to process both wet sticky material and hard dry rock or a combination of both through the same machine.

3 Stages of Breaking

The tooth geometry subjects the material to bending, tension and shear forces reducing material in a quick effective 3 stage breaking action.

Working Principle

The FP series mineral sizer crushed the ores and materials by the combined action of shearing, bending and splitting. Because of adopting low rotation speed and special tooth pattern (the crushed tooth of mineral sizer is arranged in spiral pattern, strong ability to hold the big material block.), the size smaller than the expecting will be quickly discharged from the tooth gap, without crushed, the powder and fine finished product is little. FP mineral sizer has got the right of use for coal mine underground safety signs, so it could be installed and operated in the pit.

Parameter

Please strictly refer to the product technical parameters for work. specifications are subject to change without notice. Please refer to the actual data of machine.

Primary Crushing	FP50series	FP50/80	FP50/120	FP50/160	FP50/200
	FP63series	FP63/150	FP63/200	FP63/240	FP63/300
	FP75series	FP75/150	FP75/200	FP75/300
	FP100and above series	FP100/150	FP100/200	FP100/300	FP130
Secondary Crushing	FP50series	FP50AS	FP50AM	FP50AL
	FP63series	FP63AS	FP63AM	FP63AL
	FP80series	FP80AS	FP80AM	FP80AL	FP80AKL
	FP100series	FP100AS	FP100AM	FP100AL	FP100AKL

Note:The capacity may vary with different materials and feeding sizes. Technical parameters are subject to change without notice.

CFTC is one of the most reliable Twin Shaft Mineral sizer manufacturers in China with many years of experience in Twin Shaft Mineral sizer production . We can supply a complete set of Stone Crusher with highest quality. Our products have been exported to Kenya ,Ethiopia, Zambia, Tanzania, Saudi Arabia,Sri Lanka, Egypt ,Pakistan ,Vietnam ,Indonesia, the Philippines, SouthAfrica and other countries . If you have this need or want to get the Twin Shaft Mineral sizer price , please contact us or send email to [email protected]