How to choose the capacity of 300 mesh stone mill

First of all, the Raymond mill appeared earlier, and its processing capacity is 8-176 shifts/ton per hour. Compared with ball mills, this machine has high efficiency, small footprint, easy installation and good dust-proof effect. There are different models of this device, which have certain differences in performance. So when choosing a 300-mesh stone mill, be sure to choose the right model.

Secondly, the ultra-fine mill is a kind of equipment with finer finished products, and the processing capacity is 30-800kg/h, which is relatively high. The spring-assisted device inside the equipment increases the grinding efficiency of the equipment, and the energy consumption of the machine is only one-third of that of the jet mill. It is a high-yield and low-consumption mill widely used in the market. There are also many models of this machine. In the production of 300-mesh stone mill, it can be selected according to comprehensive factors such as production demand and cost.

Third, the high-strength mill is a device whose fineness can be adjusted between 80-425 mesh, and its processing capacity in production is 0.6-176 shifts/ton/hour. This machine is one of the fine powder production equipment, but adding a special device inside the equipment can also meet the processing technology of 30-80 mesh coarse powder. In production, the screening rate of this machine is high, and the fineness of finished powder is uniform. For the selection of this machine, it is also necessary to refer to comprehensive factors such as the processing requirements of the 300-mesh stone mill and the situation of the manufacturer.

Through the above introduction, we can find that there are many types of 300-mesh stone mills. When choosing these equipment, not only should refer to the processing requirements of 300 mesh stone mill, but also consider factors such as manufacturers and market conditions.