What is the reason of the output fineness of the ultrafine mill is too coarse or too fine?

During the grinding production of the ultrafine mill, if the output particle size of the finished product is found to be too fine or too coarse, it is a kind of failure of the ultrafine mill. At this time, it is necessary to replace the blades of the equipment in time and adjust the air volume appropriately, so that it can solve the phenomenon that the particle size of the finished product is too coarse. If the particle size is too fine, the opposite is true. At this time, it is necessary to increase the wind force at the inlet of the ultrafine mill.

In addition, when the ultra-fine mill is running, the current of the main engine and the temperature of the machine may rise, and the current of the fan may decrease. This is also one of the faults of the ultra-fine mill. Once such a situation occurs , first cut off the power supply in time, and then check the power supply to see if it is stable and normal. The next step is to reduce the amount of feeding, first dredge the accumulated materials, and increase the air intake, so that the problem of abnormal temperature of the ultrafine mill can be effectively solved.

As a large-scale powder processing equipment, the ultrafine pulverizer should not only maintain the maintenance work, but also pay attention to the operation status of the superfine pulverizer, and solve the problems in time to avoid causing Bigger failures occur.