How much do you know about the mill reducer?

The reducer is a power transmission mechanism, which uses the speed converter of the gear to reduce the number of revolutions of the electric BW type horizontal double-axis cycloid reducer (motor) to all the number of revolutions, and obtain a larger number of revolutions. Torque mechanism. Among the mechanisms currently used to transmit power and motion, the application range of the reducer is quite extensive. So what does the reducer do? The reducer is to reduce the torsion frequency and increase the power of the pulverizer, so that the pulverizer can generate strong power in the toner processing to meet the requirements of the fineness of the material to be ground. The torque output ratio of the reducer is multiplied by the motor output. Be careful not to exceed the rated torque of the reducer.

During the installation process, how to install the reducer and the main machine of the pulverizer accurately? In the early days, there were two wheels connected, two forks that crossed each other. This design has its advantages and disadvantages. Since it is a cast iron fork, it will wear out faster, and it will still run. Very good. After the continuous development of ultra-fine mills, this structure has been gradually eliminated. Now they are all column-shaped. The material of the column is nylon rod. Generally, the number of column-shaped on the main machine is 12. In the middle of the two couplings, the 12 columns are driven by the reducer to make the operation gradually and smoothly. This is how the reducer and the host are connected.