How to solve the wear problem of roller crusher?

Roll crushers are usually relatively heavy equipment. After a long period of use, there will inevitably be some problems, namely wear and tear. When the roller crusher is in operation, vibration sometimes occurs. Whether it is wear or vibration, the problem should be resolved within the specified time. When using a roller crusher, due to the particularity of its use environment, if a machine failure occurs, it can be found and dealt with in time, which is of great significance to prevent production accidents and equipment damage.

First of all, what we need to do is to see if the roller crusher is badly worn. If it's not serious, we can scrape it to reduce wear. Otherwise, the worn parts must be replaced in time to make the operation of the stone crusher more stable. Second, the stone crusher vibrates and trembles. Usually, it is normal for some vibration to occur during operation, but if the vibration is severe, please check whether the machine is level; if not, check whether the feed is uneven, making it difficult to crush, and large vibration occurs; or some parts are damaged , resulting in abnormal operation of the machine. Therefore, severe vibrations and tremors need to be turned off to examine the specific cause.

After all, roller crushers are large pieces of equipment, it is normal to break large pieces of hard rock all day long, and it is normal to experience wear failures, so check them carefully and maintain them properly. For example, adding lubricating oil reduces a lot of heat generated by friction and has a certain protective effect on crushing equipment. Be careful to check the stone crusher before each operation, if there is no fault, turn it on again.

Since various problems may occur when using the roller crusher equipment, it is recommended that in daily use, different methods should be used to determine the wear process according to the corresponding conditions. It is sometimes necessary to use multiple methods to determine damage so that problems can be identified in time to avoid greater damage.