Welcome to China First Enginnering Technology Co.,Ltd
1. Different parameters
The full name of 69 jaw crusher is PE 600×900 jaw crusher. The size of the feeding port is 600×900mm. During the time, the eccentric shaft speed is 254r per minute, and the motor power is 6P 55kw.
The full name of 75 jaw crusher is PE 750×1060 jaw crusher. The size of the feeding port is 750×1060mm. During the time, the eccentric shaft rotates 254r per minute, and the motor power is 8P 110kw.
2. Different applications
It can be seen from the above technical parameters that the production capacity of the 69 jaw crusher is not as strong as that of the 75 jaw crusher, and the feeding particle size is not as large as that of the 75 jaw crusher. Different types of jaw crushers have different applications.
If the processing material is required to produce 100 tons per hour, the 69 jaw crusher can be used. If the required hourly production capacity is 200 tons, it is more suitable to configure the 75 jaw crusher. When choosing the 69 jaw crusher as the rough stone crushing equipment, in the selection of the secondary crushing equipment, the production capacity must match the 69 jaw crusher, and the output of the 69 jaw crusher must meet the feeding requirements of the secondary crushing equipment; When choosing 75 jaw crusher as the primary crusher, the selection criteria of secondary crushing equipment are the same as 69 jaw crusher.
Both the 69 and 75 jaw crushers are medium-sized crushers, so the quotation is not too high. Starting from hundreds of thousands, the 75 jaw crusher is more expensive than the 69 jaw crusher, because the larger the model, the higher the price. However, the specific cost of 69 jaw crusher and 75 jaw crusher depends on the cost (labor, material, water and electricity, etc.) invested by the manufacturer when designing and manufacturing. The final price for the equipment is more expensive.
*We will provide you with the most suitble producets*
*Wo Promise to reply within 24 hours.*
